This battery edge cutting machine is mainly used for lithium polymer battery aluminum-plastic film trimming molding, and it can also be used for cutting off other soft materials. It is widely used in the final steps of pouch cell battery pilot scale production line to ensure a smooth, neat and tidy casing edge.
XW-ZKFK200/300 Compact Vacuum Sealer is specifically designed for professional Li-ion Battery Research. It is mainly used for sealing aluminum-laminated case in glove box after injection of electrolyte into pouch Li-ion cell or after formation for final seal (polymer Li-Ion cell). Heat able sealer blade is built into the chamber, automatically sealing the aluminum film pouch case for polymer battery.
XW-JZ200 electrolyte diffusion chamber is specifically designed for professional Li-ion Battery Research. It is mainly used for removing air from the electrolyte after it’s been injected into the polymer Li-ion cell/cylinder cell or after the formation for final sealing under a vacuumed condition. It is easy to operate and suitable for all types of batteries (especially soft bag battery and cylinder battery). Unique periods of vacuum control system allows electrolyte to thoroughly saturate the electrodes to ensure the best battery charging-discharging performance.
XW-BD is an ergonomic, intuitive electronic pipette made in Germany used for dispensing electrolyte (LiPF6 for Li-ion Battery) to small Coin Cells from battery research and material coating for Spin Coating in most material research laboratories. 2.The soft-touch pipette key, adjustable finger-rest, light weight and innovative tip cone minimize static strain and operational forces, reducing the risk of repetitive stress injuries (RSI). This is the first electronic pipette to be awarded the “Ergonomics Approved” and “User-Friendly” certification from the prestigious TÜV testing service, an OSHA-accredited testing laboratory.
XW-GL750 is a stainless steel glove box designed for researches in material science, chemistry, semiconductor, and related topics. The purification cylinder is made of BASF R3-11 Copper Catalyst and Lindy Molecular Sieve in order to achieve a low water and oxygen concentration of lower than 1ppm, such that experiments can be conducted in a ultra-clean and highly purified gas environment. It is integrated with vapor pressure control system, purity control system, automatic gas purity regeneration control system, and system data log recording. EQ-VGB-6 is widely used in preparing Nano materials, Li-ion battery materials, catalysts, and metalorganics.
XW-CFJ200 Battery heat sealing machine is a compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation. The battery heat sealing machine adopts soft sealing bar. The sealing is copper in bottom and aluminum and Silicone rubber piece on top. So it can be used for both top and side sealing for pouch cell. It can prepare the pouch cell for the injection of electrolyte by sealing the side and top of the pouch cell with tab.